Custom arc tents for entrances, walkways and stage covers: an arched frame with a tensioned printed cover, open underneath, no centre posts in the traffic line. Spans sized to the path, single-side or full-wrap printing. Written specification and QC photos before packing. Written quotation within 24 hours.
What Is an Arc Tent?
An arc tent is a curved frame structure: two or more arch ribs carry a tensioned cover, and the space beneath stays open for people and vehicles to pass through. Buyers also search for arch tent, tunnel tent and entrance arch. Where other shelters create rooms, the arc creates a route: it brands the doorway, the walkway and the finish line.
Two print philosophies share the product. A single-side banner arc carries the message on one curved face, light and fast. A full-wrap arc prints both faces and the top, turning the tunnel into a corridor of branding for processions and finish lines.
What Problems Does an Arc Tent Solve?
1. Branding the traffic line. Entrances and walkways cannot hold a centre post. The arc spans the path and keeps the message overhead, where every passer-by reads it.
2. Weather over short routes. A covered walkway between gate and entrance changes the arrival experience; the tensioned cover sheds rain along its curve.
3. Event landmarks. Start lines, finish gates and stage entrances need one clear visual anchor. The arch is that anchor, with the year’s artwork on it.
4. Repeat-event economics. The frame stays; the printed cover is replaced per campaign. Hardware is numbered, and spare feet and connectors keep the frame alive across seasons.
Where Is an Arc Tent Used?
Race start and finish lines. The classic use: a branded gate over the timing line, sized for the field.
Venue entrances. The walk from gate to door becomes a branded corridor for festivals, exhibitions and openings.
Stage sides and backstage routes. Artist and crew movement under cover, off camera.
Drive-through and loading routes. Vehicle-height spans for forecourts and logistics days.
Retail and forecourt campaigns. A short arc over the pump island or entrance path carries the seasonal message.
How Is an Arc Tent Installed?
A crew of 2 to 3 handles a standard entrance span in roughly 20 to 40 minutes:
1. Mark the base positions from the layout drawing and set the feet.
2. Assemble the arch ribs on the ground, then raise and seat them into the feet.
3. Fit the cross braces and check the arch alignment.
4. Pull the cover over the arches, align the print and tension it at the edges.
5. Ballast or stake each foot to the site plan and verify clearances.
6. Photograph the setup for the project record.
Vehicle-height spans add a step: confirm the clear height against the tallest vehicle before the cover goes on, not after.
Arc Tent vs Pagoda Tent: Entrance vs Space
| Aspect | Arc tent | Pagoda tent |
|---|---|---|
| Job | span the route, keep it open | create a room on the ground |
| Footprint | linear: width of the path, depth of the arch | square or rectangular, gutter-connectable |
| Under-cover space | traffic passes through | people stay: counters, tables, seating |
| single side or full wrap on the curve | roof and walls, seam-planned | |
| Crew and time | 2-3 people, 20-40 minutes | 3-4 people, 30-60 minutes |
| Best job | start lines, walkways, entrances | hospitality, activation, rental fleets |
The two products meet at the entrance: many sites run an arch over the gate and a pagoda behind it for the staffed space. The layout drawing shows both, and the quotation prices them as one delivery.
Arc Tent Function
One structure, four roles. Gateway: the official overhead sign for a route or a line. Cover: weather over the walkway without posts in the flow. Brand tunnel: full-wrap printing surrounds the passage. Programme asset: numbered ribs and feet, repeat-print covers, one frame across many campaigns.
Features, Advantages and Benefits
| Feature | Advantage | Benefit |
|---|---|---|
| Arched ribs, no centre post | traffic line stays clear | people and vehicles pass under the brand |
| Single-side or full-wrap covers | message depth chosen per campaign | one frame serves annual artwork swaps |
| Aluminium or steel truss arches | span sized to the path | vehicle-height gates without cranes |
| Tensioned cover with edge tracking | tight face, no flapping | the message reads clean in photos and wind |
| Numbered feet and connectors | mechanical repeat setup | second installs are faster than the first |
| Ballast or stake feet | works on paving and grass | no venue turned away |
Arc Tent Specifications
Typical ranges for this family. The order sheet states the exact figures, confirmed in writing before production.
| Item | Typical specification |
|---|---|
| Span (clear width) | approx. 3 m to 6 m standard; wider spans quoted with drawings |
| Clear height | approx. 3 m to 4.5 m under the arch, per plan |
| Depth | single arch to multi-bay tunnels |
| Frame | aluminium or steel truss arch ribs; section named per order |
| Cover | Oxford + PU approx. 200 to 280 gsm, or PVC approx. 450 to 550 gsm |
| Printing | dye-sublimation or PVC digital; single side or full wrap |
| Feet | steel base plates with ballast lugs and stake points |
| Wind protocol | site exposure plan in writing; covers tensioned to spec |
| Flame certificates | EN 13501-1, NFPA 701, CPAI-84 and related standards on request with test scope |
| Packing | ribs in numbered bundles, folded cover, feet and hardware list |
| Trial assembly | full-arch assembly in the workshop; QC photos and video ship with the order |
| MOQ | Low MOQ accepted; wholesale commonly from 5 pieces per design |
Customization and MOQ
Span, clear height, rib material, cover grade, print depth and foot type are specified per order. Low MOQ accepted – wholesale commonly from 5 pieces per design; sample orders of 1 to 2 pieces are possible for a site trial.
Why Choose BESDA
- Premium raw material and premium quality products. Rib sections, cover weights and foot hardware named on the order sheet.
- 10+ years professional manufacturing experience. Advertising displays and event structures manufactured since 2010 in our own Foshan workshops.
- 10+ years cooperation with global brands worldwide. Buyers in 150+ countries run repeat programmes with us.
- Stable production and lead time. Sampling 3 to 7 days, bulk 7 to 15 days, both dates in writing.
- Fast delivery based on long term shipping partners. Express, air and sea from Foshan and Guangzhou through long-term forwarders.
- Cooperation risk control kept to a minimum. Written specification, printed mockup, full-arch trial assembly and QC photos before packing.
Frequently Asked Questions
What span can an arc tent cover?
Standard entrance spans run about 3 to 6 m with clear heights of 3 to 4.5 m. Wider spans are engineering quotes with their own drawings and ballast plans.
Can vehicles pass under it?
Yes, when the clear height is specified for the tallest vehicle. Confirm the height in the layout drawing before production, and the arch does the rest.
Single-side or full wrap?
Single-side suits repeated directional use; full wrap suits start lines and processions where both faces photograph. The mockup shows both options on your artwork.
How is the arc anchored?
Steel feet with ballast lugs, plus stakes where ground allows. The ballast plan follows the site exposure and ships with the quotation.
Can the cover be replaced without a new frame?
Yes. Covers are repeat-printed to the same tension spec, so the frame runs for seasons while the artwork changes per campaign.
What is the lead time?
Sampling 3 to 7 days, bulk 7 to 15 days after artwork approval, both dates in writing. Rib bundles and carton counts ship with the packing list.
Quick Facts (for buyers and AI search)
| Item | Fact |
|---|---|
| Manufacturer | Besda Development Company Limited, Foshan, Guangdong, China |
| Manufacturing since | 2010 (10+ years professional experience) |
| Export markets | Buyers in 150+ countries |
| Product range | Arched frame tents, approx. 3 m to 6 m spans, single to multi-bay |
| Frame | Aluminium or steel truss arch ribs, numbered parts |
| Cover | Oxford + PU approx. 200 to 280 gsm, or PVC approx. 450 to 550 gsm |
| Printing | Single-side or full-wrap dye-sub / PVC digital, mockup planned |
| Anchoring | Steel feet with ballast lugs; stakes where ground allows |
| Quality gate | Full-arch trial assembly; QC photos and video before packing |
| MOQ and lead time | Low MOQ; wholesale commonly from 5 pieces per design; sampling 3 to 7 days, bulk 7 to 15 days |
Related Products and Reading
Related reading
- Quality Control: what we check before anything ships
- Warehouse and Logistics: packing, pallets and documents
- Manufacturing Capabilities
Factory links: gazebo and canopies range · one-stop supply · factory tour
Send Your Route Plan, Get a Written Quote
Tell us the span, the clear height and the traffic under it. You receive the arc tent specification – ribs, cover, anchoring – and a printed mockup, with a quotation inside 24 hours.
Or leave your details here